Great Wall K2 V Series Trico Hybrid Front Wiper Blades & 500ml Wiper Fluid 2009-on

Item:
Pair of front wiper blades
Trico Fit Hybrid Blade
Part# HF550 / HF500
And 500ml Wiper Fluid

Vehicle Application:
2009 - on Great Wall V Series K2 models


500ml Trico Vision Windscreen Washer Additive

Makes up to 20ltrs

Trico Original Equipment formula as used by leading car manufacturers. Made in Australia for Australian Conditions

• Removes bugs from windscreen
• Stops windscreen smearing
• Dissolves road grime
• Reduces wear & tear on wiper blades
• Wont damage paintwork

Mixing Instructions
Pour one measure  (50ml) per windscreen reservoir. For larger reservoirs (i.e 3ltr or more) add two measures.

Care Instructions

• Keep out of reach of children
• If swallowed seek medical advice
• Avoid contact with eyes
• If in eyes wash out immediately with water

Trico® Fit Hybrid Blade

Trico® Fit Hybrid replacement blades make it easy to restore your vehicle to original factory look and quality. Premium strength polymer shell safe guards the 100% natural rubber wiping element for protection from UV attack and environmental weathering. Durable spring strength provides optimum beam blade performance for the finest clear screen, in all conditions.

Hook arm connection suits the majority of original vehicle hybrid arm applications

Specifications

• High-strength polymer shell safeguards blade and provides optimum contact pressure
• Superior performance all weather windshield wiper
• 100% natural rubber fully bonded non-replacement wiper element
• Robust superstructure

Trico® Wipe Performance Diagnosis

Inside the Vehicle

Squirt the washers and do a visual wipe test.
Look and listen for the 6 symptoms of poor performance;

• Streaking - fit a new blade
• Smearing - clean the screen & blade or fit a new blade
• Squeaking - fit a new blade
• Shuddering - fit a new blade
• Fishtailing - fit a new blade
• Unwiped - clean the screen & blade or fit a new blade

Outside the Vehicle

Visually inspect the blade assembly for damage and 'layover'. Layover is usually caused by excessive wear in the blade assembly. Change blade if required.

Lift the blade assembly up off the windscreen. Grab the wiper insert or rubber element in the centre directly opposite the blade to arm adaptor. Check for lateral (sideways) movement. If you can move the insert 5mm or more in total the blade assembly should be replaced.

Lateral wear of the blade-to-arm adaptor can produce excessive movement. Check for excessive movement or 'wobble' of the blade assembly away from the wiper arm. If there is free-play here it will accentuate the lay-over effect, significantly reducing the life of the wipers. If wear is found in the adaptor, the blade assembly should be replaced.