Hyundai Accent, X3 Accent Trico Force Front Wiper Blades & 500ml wiper fluid 1995-1999

Item:
Pair of front wiper blades
Trico Force
Part# TF560 / TF400
And 500ml Wiper Fluid

Vehicle Application:
1995 - 1999 Hyundai Accent Accent, X3 models


500ml Trico Vision Windscreen Washer Additive

Makes up to 20ltrs

Trico Original Equipment formula as used by leading car manufacturers. Made in Australia for Australian Conditions

• Removes bugs from windscreen
• Stops windscreen smearing
• Dissolves road grime
• Reduces wear & tear on wiper blades
• Wont damage paintwork

Mixing Instructions
Pour one measure  (50ml) per windscreen reservoir. For larger reservoirs (i.e 3ltr or more) add two measures.

Care Instructions

• Keep out of reach of children
• If swallowed seek medical advice
• Avoid contact with eyes
• If in eyes wash out immediately with water

Trico® Force™

TRICO Force™ is the most comprehensive multi-connection beam blade program in Australia. With SWIFT® Easy Connection Technology and trusted Trico® performance, the HighGlide™ treated rubber element ensures a clear wipe and outstanding performance for the life of the wiper blade.

The high wind beam blade, with a patented VorTec™ swept-wing spoiler, slices through wind speeds in excess of 220KPH caused by cross winds, buffeting truck winds and general traffic turbulence.

TRICO Force™ includes a robustly engineered superstructure which provides durable long life all-weather performance.

Specifications

• VorTec™ aerofoil converts wind force
• HighGlide™ treated 100% natural rubber element
• SWIFT® easy connection technology including European arm connections
• Robust durable superstructure

Trico® Wipe Performance Diagnosis

Inside the Vehicle

Squirt the washers and do a visual wipe test.
Look and listen for the 6 symptoms of poor performance;

• Streaking - fit a new blade
• Smearing - clean the screen & blade or fit a new blade
• Squeaking - fit a new blade
• Shuddering - fit a new blade
• Fishtailing - fit a new blade
• Unwiped - clean the screen & blade or fit a new blade

Outside the Vehicle

Visually inspect the blade assembly for damage and 'layover'. Layover is usually caused by excessive wear in the blade assembly. Change blade if required.

Lift the blade assembly up off the windscreen. Grab the wiper insert or rubber element in the centre directly opposite the blade to arm adaptor. Check for lateral (sideways) movement. If you can move the insert 5mm or more in total the blade assembly should be replaced.

Lateral wear of the blade-to-arm adaptor can produce excessive movement. Check for excessive movement or 'wobble' of the blade assembly away from the wiper arm. If there is free-play here it will accentuate the lay-over effect, significantly reducing the life of the wipers. If wear is found in the adaptor, the blade assembly should be replaced.